Prihlásenie
Slovensky
SK
English
ENG
Hungary
HU
Nákupný košík

Úvod | ELEKTRO MOTORY - Striedavé | Outrunner 05xx - 88xx | Outrunner 30xx | Outrunner JP Hobby MT-3055 30mm Motor pre dúchadlo

JP Hobby Outrunner JP Hobby MT-3055 30mm Motor pre dúchadlo

JP Hobby- IMI Slovakia

JP Hobby Outrunner JP Hobby MT-3055 30mm Motor pre dúchadlo
Späť

Outrunner JP Hobby MT-3055 30mm Motor pre dúchadlo

Kód produktu: JPH-MT70-3055-4S
Výrobca: JP Hobby
Dostupnosť: Nie je skladom/No Stock
49,00 €
39,84 € bez DPH
Pridať do košíka


Varianty tohto produktu

JP Hobby MT-3055-4S 30mm 3300Kv
Kód: JPH-MT70-3055-4S
Nie je skladom/No Stock 49,00 € Pridať do košíka
JP Hobby MT-3055-6S 30mm 2250Kv
Kód: JPH-MT70-3055-6S
Nie je skladom/No Stock 49,00 € Pridať do košíka
JP HOBBY MT-3055-TWIN6S 30MM 2200Kv
Kód: JPH-MT70-3055-T6S
Nie je skladom/No Stock 49,00 € Pridať do košíka


DATA SHEET

Length (mm): 55mm
Weight (gr): 116g
No. of Magnet Poles: 12
Turns/min/Volt (Kv): 3300Kv
Motor Type: Out-Runner
Motor Diameter (mm): 30
Shaft diameter (mm): 5
Power (Watts): 2832W
Intensity (A): 90 A
Battery Cells: 4s - 14.8v
Connection: PK 4mm

MORE INFO

JP Hobby MT-3055-4S 30mm 3300Kv Motor

Description

This JP Hobby 12 poles outrunner motor can be used as a replacement for the JP Hobby 70mm EDF 4S unit for or for any other application.

Specifications

  • Model: MT-3055-4S
  • Max Amps: 90A
  • Max voltage: 14.8v
  • Max Power: 2832W
  • KV(RPM/Volt): 3300
  • Motor Poles: 12
  • Resistance: na
  • No-load Current (15v): na
  • Diameter×Length (mm): Φ30x55
  • Dynamic Balance Weight: 0.01mg
  • Mounting hole depth: nc
  • Length of extend Shaft: na
  • Shaft Diameter (mm): Φ5.0
  • Weight: 116g

 

Warning: Operating the motor outside of the specifications listed above can either damage the motor, battery or esc. 
It is important that these components are set up properly. Failure to do so can void the warranty.
It is strongly encouraged to use a Watt Meter to test the watt and amp performance when setting up a new system.
If the output is above the factory recommended specs, then it needs to be adjusted by the esc.
The timing and throttle settings on the esc can help to set the appropriate levels.

 

Warning: Screws that are too long can short out the windings resulting in a cooked motor, this is not covered by warranty

Späť

Domov | Kontakt | Obchodné podmienky | Ochrana osobných údajov | Informácie o cookies
© IMI 2005 - 2025, Všetky práva vyhradené. | created by Weblife
Počet prístupov: 33682890
Počet produktov: 9430